|
|
|
 |
CraftMaster molded door designs, CraftMaster Green Doors, MiraTEC trim and Extira
panels contribute to LEED® credits in the following categories:
LEED 2009 for Commercial Interiors
|
CraftMaster Green Doors
|
Credits
|
Description
|
|
Recycled Content
|
MR 4
|
Use materials, including furniture and furnishings, with recycled content such that the sum
of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least
10% or 20% based on the total value of the materials in the project. The minimum percentage
materials recycled for each point threshold is as follows: 1 point for 10% recycled content
and 2 points for 20% recycled content.
|
|
Regional Materials 1
|
MR 5
|
Option 1 (1 Point): Use a minimum of 20% of the combined value of construction and Division 12
(furniture) materials and products that are manufactured regionally within a radius of 500 miles.
Option 2 (2 Points): Meet the requirements of Option 1 and use a minimum of 10% of the combined
value of construction and Division 12 (furniture) materials and products extracted, harvested or
recovered, as well as manufactured, within 500 miles of the project.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
CraftMaster Molded Door Designs
|
Credits
|
Description
|
|
Recycled Content
|
MR 4
|
Use materials, including furniture and furnishings, with recycled content such that the sum
of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least
10% or 20% based on the total value of the materials in the project. The minimum percentage
materials recycled for each point threshold is as follows: 1 point for 10% recycled content
and 2 points for 20% recycled content.
|
|
Regional Materials 1
|
MR 5
|
Option 1 (1 Point): Use a minimum of 20% of the combined value of construction and Division 12
(furniture) materials and products that are manufactured regionally within a radius of 500 miles.
Option 2 (2 Points): Meet the requirements of Option 1 and use a minimum of 10% of the combined
value of construction and Division 12 (furniture) materials and products extracted, harvested or
recovered, as well as manufactured, within 500 miles of the project.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
MiraTEC Trim
|
Credits
|
Description
|
|
Regional Materials 1
|
MR 5
|
Option 1 (1 Point): Use a minimum of 20% of the combined value of construction and Division 12
(furniture) materials and products that are manufactured regionally within a radius of 500 miles.
Option 2 (2 Points): Meet the requirements of Option 1 and use a minimum of 10% of the combined
value of construction and Division 12 (furniture) materials and products extracted, harvested or
recovered, as well as manufactured, within 500 miles of the project.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
Extira Panels
|
Credits
|
Description
|
|
Regional Materials 1
|
MR 5
|
Option 1 (1 Point): Use a minimum of 20% of the combined value of construction and Division 12
(furniture) materials and products that are manufactured regionally within a radius of 500 miles.
Option 2 (2 Points): Meet the requirements of Option 1 and use a minimum of 10% of the combined
value of construction and Division 12 (furniture) materials and products extracted, harvested or
recovered, as well as manufactured, within 500 miles of the project.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
LEED 2009 for New Construction and Major Renovations
|
CraftMaster Green Doors
|
Credits
|
Description
|
|
Recycled Content
|
MR 4
|
Use materials with recycled content such that the sum of post-consumer recycled content plus
1/2 of the pre-consumer content constitutes at least 10% or 20%, based on cost, of the total
value of the materials in the project. The minimum percentage materials recycled for each point
threshold is as follows: 1 point for 10% recycled content and 2 points for 20% recycled content.
|
|
Regional Materials 1
|
MR 5
|
Use building materials or products that have been extracted, harvested or recovered, as well as
manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of
the total materials value. If only a fraction of a product or material is extracted, harvested,
or recovered and manufactured locally, then only that percentage (by weight) can contribute to
the regional value. The minimum percentage regional materials for each point threshold is as
follows: 1 point for 10% regional materials and 2 points for 20% regional materials.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
CraftMaster Molded Door Designs
|
Credits
|
Description
|
|
Recycled Content
|
MR 4
|
Use materials with recycled content such that the sum of post-consumer recycled content plus
1/2 of the pre-consumer content constitutes at least 10% or 20%, based on cost, of the total
value of the materials in the project. The minimum percentage materials recycled for each point
threshold is as follows: 1 point for 10% recycled content and 2 points for 20% recycled content.
|
|
Regional Materials 1
|
MR 5
|
Use building materials or products that have been extracted, harvested or recovered, as well as
manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of
the total materials value. If only a fraction of a product or material is extracted, harvested,
or recovered and manufactured locally, then only that percentage (by weight) can contribute to
the regional value. The minimum percentage regional materials for each point threshold is as
follows: 1 point for 10% regional materials and 2 points for 20% regional materials.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
MiraTEC Trim
|
Credits
|
Description
|
|
Regional Materials 1
|
MR 5
|
Use building materials or products that have been extracted, harvested or recovered, as well as
manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of
the total materials value. If only a fraction of a product or material is extracted, harvested,
or recovered and manufactured locally, then only that percentage (by weight) can contribute to
the regional value. The minimum percentage regional materials for each point threshold is as
follows: 1 point for 10% regional materials and 2 points for 20% regional materials.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
|
Extira Panels
|
Credits
|
Description
|
|
Regional Materials 1
|
MR 5
|
Use building materials or products that have been extracted, harvested or recovered, as well as
manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of
the total materials value. If only a fraction of a product or material is extracted, harvested,
or recovered and manufactured locally, then only that percentage (by weight) can contribute to
the regional value. The minimum percentage regional materials for each point threshold is as
follows: 1 point for 10% regional materials and 2 points for 20% regional materials.
|
|
Low-Emitting Materials – Composite Wood and Agrifiber Products
|
IEQ 4.4
|
Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing
system) must contain no added urea formaldehyde resins.
|
LEED for Homes
|
CraftMaster Green Doors
|
Credits
|
Description
|
|
Environmentally Preferable Products
|
MR 2.2
|
Use building component materials that meet the following criteria:
- Environmentally preferable products meet the specifications listed in Table 24
of LEED for Homes Rating System, includes: for doors (not including garage or
insulated doors) contain recycled content, are FSC-certified or reclaimed.
AND/OR
- Local production1 – use products that were extracted, processed, and manufactured
within 500 miles of the home.
|
|
CraftMaster Molded Door Designs
|
Credits
|
Description
|
|
Environmentally Preferable Products
|
MR 2.2
|
Use building component materials that meet the following criteria:
- Environmentally preferable products meet the specifications listed in
Table 24 of LEED for Homes Rating System, includes: for doors (not including garage or
insulated doors) contain recycled content, are FSC-certified or reclaimed.
AND/OR
- Local production1 – use products that were extracted, processed, and manufactured
within 500 miles of the home.
|
|
MiraTEC Trim
|
Credits
|
Description
|
|
Nontoxic Pest Control
|
SS 5
|
In areas marked “moderate to heavy” on the termite infestation
probability map, treat all cellulosic material with a borate product
to a minimum of 3 feet above the foundation.
MiraTEC trim contains zinc borate.
|
|
Extira Panels
|
Credits
|
Description
|
|
Nontoxic Pest Control
|
SS 5
|
In areas marked “moderate to heavy” on the termite infestation
probability map, treat all cellulosic material with a borate product
to a minimum of 3 feet above the foundation.
Extira Panels contain zinc borate.
|
1 dependent on project site location
|
|
